Is this off the carbs

Post Reply
User avatar
sneck
Forum Regular
Forum Regular
Posts: 37
Joined: Fri Oct 14, 2011 6:15 pm
Location: United Kingdom
Location: United Kingdom

Is this off the carbs

Post by sneck »

I have just about got all the float levels correct just some minor adjustment to do now,(see other thread viewtopic.php?f=20&t=7531)

But having had my carbs in bits I have found this on the bench but unsure if its off the carbs or not,the inside diameter of the small bush is the same as the connecting rod in the middle of the carbs 3 and 4 its roughly about 5mm or 1/4 inch in diameter (see pics).
I have looked at several parts diagrams but cannot see this part, does anyone recognise it ?

Image

Image

Image

Image

Thanks Sneck
steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 3931
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Is this off the carbs

Post by steve murdoch icoa #5322 »

Sneck it looks to me like part# 11346-371-300
A spacer on a bolt near the cover where you check the oil level.
Part #2?
http://www.bikebandit.com/houseofmotorc ... #sch404550
User avatar
cbx6ss
ICOA Member
ICOA Member
Posts: 323
Joined: Tue Apr 26, 2005 9:17 pm
Location: Virginia Beach, Virginia
Location: Virginia Beach, Virginia

Re: Is this off the carbs

Post by cbx6ss »

Are your air Tees in place?
User avatar
cbx6ss
ICOA Member
ICOA Member
Posts: 323
Joined: Tue Apr 26, 2005 9:17 pm
Location: Virginia Beach, Virginia
Location: Virginia Beach, Virginia

Re: Is this off the carbs

Post by cbx6ss »

Post Reply