Hi guys, my 1979 Z is running a bit rough in low revs.
I thought it was carbs, but my mechanic tuned them.
What happens is: below 2000rpm, it feels like the engine is running on 4 or 5 cyls, a bit like when the petrol is running out and you have to turn the petcock to reserve. After 2000rpm it runs great.
I have aftermarket exhausts (similar to original but a bit louder).
Not really sure if this is electric or carb related, but maybe you guys can give an idea of what might be happening? Maybe one of the coils? Maybe the spark plug cables? Maybe none of the above???
Any help would be greatly appreciated.
Thanks
Rough running up to 2000rpm
- zalle
- Forum Regular
- Posts: 115
- Joined: Sat Jul 24, 2004 12:20 pm
Rough running up to 2000rpm
You do not have the required permissions to view the files attached to this post.
-
- ICOA Member
- Posts: 3931
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Rough running up to 2000rpm
Despite your mechanic tuning your carbs it sounds your idle jets still need attention.
Did the carb tune/cleaning include pulling the idle jets?
Btw, nice looking bike.
Did the carb tune/cleaning include pulling the idle jets?
Btw, nice looking bike.
-
- ICOA Member
- Posts: 733
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: Rough running up to 2000rpm
I agree I would bet on idle jets plugged.steve murdoch icoa #5322 wrote: Thu Apr 08, 2021 6:24 am Despite your mechanic tuning your carbs it sounds your idle jets still need attention.
Did the carb tune/cleaning include pulling the idle jets?
Btw, nice looking bike.
-
- ICOA Technical Director
- Posts: 4762
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Rough running up to 2000rpm
Guaranteed, it's the carbs. They need to come off and be completely rebuilt.
Dave
Dave
- zalle
- Forum Regular
- Posts: 115
- Joined: Sat Jul 24, 2004 12:20 pm
Re: Rough running up to 2000rpm
Ok... They did not come off, they were just tuned.
No easy way of doing this, right? They need to come off?
"Btw, nice looking bike." Thanks Steve.
No easy way of doing this, right? They need to come off?
"Btw, nice looking bike." Thanks Steve.
-
- ICOA Technical Director
- Posts: 4762
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Rough running up to 2000rpm
Correct, but most importantly, find someone that actually rebuilds CBX carbs to do it, not just a 'mechanic'. Ask around.
Dave
Dave
- zalle
- Forum Regular
- Posts: 115
- Joined: Sat Jul 24, 2004 12:20 pm