Page 1 of 1
Oil filter housing.
Posted: Sat Jun 13, 2015 6:28 pm
by Patriotprop
Painted or unpainted. I ran my housing threw the ultrasonic and then into the glass bead cabinet. It was painted when I took it off but now it looks good freshly glass beaded it is hard to tell if it should be painted ?
Thanks for the help
Re: Oil filter housing.
Posted: Sat Jun 13, 2015 6:38 pm
by tevan
Paint
Re: Oil filter housing.
Posted: Sat Jun 13, 2015 6:48 pm
by EMS
Polish.
Re: Oil filter housing.
Posted: Sat Jun 13, 2015 7:45 pm
by tevan
Flip a coin
Re: Oil filter housing.
Posted: Sat Jun 13, 2015 9:44 pm
by daves79x
Paint.
Dave
Re: Oil filter housing.
Posted: Sat Jun 13, 2015 11:51 pm
by Patriotprop
Paint it is. Thanks
Re: Oil filter housing.
Posted: Sun Jun 14, 2015 8:58 am
by EMS
The location of the filter is not the best to keep paint nice. It is right behind the front wheel and will get quite some debris thrown at it. Pick a paint that has a degree of chip resistance....
Re: Oil filter housing.
Posted: Sun Jun 14, 2015 10:21 am
by asacuta
What about anodizing? You could do black or silver, or if you're into colours, you could do blue, gold, red, etc.
